Products  /  Automotive  /  Vehicle Data Harvesting  /  Data Recording Platforms  /  AVETO Starter Kit

AVETO Starter Kit

The AVETO Validation Toolchain offers a complete system for the recording, analysis and processing of many sensors, such as cameras, lidar or radars, for the entire validation process. From the beginning with a small setup up to highly complex measurement setup, the modular system can be scaled according to requirements, thus offering a future-proof investment.

 

With the AVETO Starter Kit you take the first steps in sensor validation. You receive a complete setup for validation of two camera systems. Of course, you can also expand this setup afterwards and adapt it to your needs.

Watch the following videos to learn more about the AVETO Starter Kit.

AVETO Starter Kit Components

2 Imaging Cameras

 

Cables and accessories

 

Discover our modular and compact BRICKplus system

  • 1*1Gbit/sec ETH port for clustering of different BRICK systems
  • 2* 10Gbit/sec ETH ports for time distribution to the MDILinks
  • Two BRICK Measurement Card - BMC slot in the BMC-Add-On
    • ETH6000 extends the number of 1Gbit/sec time-sync ports to 10 ports
    • VB2: Expands the measurement technology capacities e.g. 8* CAN-HS/FD
  • Access to all components: 1*1Gbit/sec ETH port for Management tasks (e.g. configuration, update, remote access, connection to other devices)
  • BRICK Storageplus: Removable storage expansion with up to 32 TB capacity. Simplifies data feed into the data center, e.g. with the help of the COPYLynx copy station

Time Synchronization

Configure the time synchronization service (based on the latest IEEE 802.1 AS specification 2020) according to your requirements, e.g. synchronization to GPS time, use multiple time domains and monitor time synchronization results such as GPS sync status or even time offsets between time master and slave during runtime.

 

Data integrity

Learn how our MDILink can be configured for different FPD-III link configurations. The Data is protected from the b-plus MDI to the BRICKplus Data Collector and even within our brec file format from the beginning.

 

Visualization software

Visualize the camera images and CAN messages in AVETO.app Developer in correlation with GPS data, develop your own visualization objects in C++with the SDK or even integrate your algorithm into the framework.

Not enough? Use the replay function and train your algo again.

 

 

    • Name

      Bestellnummer

      Beschreibung

      AVETO Starter Kit for sensor validation FPDLB17575-BCS-002-0000

      Sensor validation kit consisting:

      BRICK-CORE-COMplus, including XTSS-TR+UDP
      BRICK STORAGEplus, 16TB RAID SSD Storage 
      BRICK Measurement Card, 8x CAN-FD
      BRICK Measurement Card, 6x 1GbE TS and PoE
      Cable set and 12V power supply, 
      Measurement Data Interface, 2x FPDLink-III 
      AVETO Software Suite pre-installed

      AVETO Starter Kit for sensor validation GMSLB17575-BCS-004-0000

      Sensor validation kit consisting:

      BRICK CORE COMplus, including XTSS-TR+UDP
      BRICK STORAGEplus, 16TB RAID SSD Storage
      BRICK Measurement Card, 8x CAN-FD
      BRICK Measurement Card, 6x 1GbE TS and PoE 
      Measurement Data Interface, 2x GMSL2 TAP
      Cable set and 12V power supply
      AVETO Software Suite pre-installed

Information request

Infoanfrage

Inforequest

The use or processing of your data takes place within the framework of our data protection information, which you can view here.

* Mandatory item