Products  /  Automotive  /  Vehicle Data Harvesting  /  Power Management  /  BRICK UPS

BRICK UPS 200

Uninterruptible power supply for vehicle systems



BRICK UPS is an extremely flat and compact uninterruptible power supply (UPS) with intelligent power management features. The typical use case is in vehicle measurement systems and vehicle data logging. The battery packs have been chosen to meet extended requirements for capacity and high current capability in the full operating temperature range. BRICK UPS offers a safe way to operate powerful measurement systems in a test drive in a controlled way.

Modern power management in vehicles often disallows the tapping of power from the 12V or 24V  board net. Especially in electronic powered vehicles the careful use of board net energy is getting more important. Exactly here BRICK UPS comes in play. The vehicle is now able to communicate to the UPS if it allows the tapping of energy from the board net.

      • 200 Watt Power / 160 Wh Energy Storage
      • Diagnostics and power Management setup via Ethernet
      • Minimal Dimensions
      • Integration in the board net Management
      • Operation at negative temperatures <0°C
      • Input voltage supply / Clamp 15/30
      • Changeable smart batteries

    • Power Out – Energy supply

      • 14,8V / 15A stable DC/DC Power output, in normal power supply range (>10V – 32V)
      • Power output in UPS mode nominal 10,8V / 18A (8,0V to 13,0V depending on battery load) (Vin<10V)
      • UPS max. output current (electronic fuse): 18A (including GPOs)

      Interface to the vehicle - CARCTRL

      • Clamp 15 ignition on signal
      • LOAD – Load of the vehicle supply for the permission for load and distribute power
      • Optional: CAN BUS CARCTRL for special CAN-based power management from the vehicle* – on demand

      Interface to the measurement system - SYSCTRL

      • IGNITION CTRL digital control signal for the power on of the measurement system
      • CAN BUS SYSCTRL communication within the BRICK components

      GPIO (option)

      • 4xDIGITAL IN
      • 4xDIGITAL OUT

      (6A HighSide, Ua-switching, short circuit resistance – max. total current GPO+Power Out can be 18A)

      LAN

      • 100Mbit LAN-interface for network based device management

      Energy storage

      • 2x Li-ionen smart batteries
      • max. 80Wh per battery
      • 10,8V nominal battery voltage

      Operating temperature range

      • Standby operation: -25°C ~ +70°C
      • Discharge (USV) Mode: -20°C ~ +60°C
      • Batterie Charge: 0°C ~ +50°C

      Housing

      • Robust aluminum profile housing
      • W: 320mm, H: 22mm(0,5 HE), D: 250mm

      Certification

      • CE, UL, FCC, RoHS, REACH, KC

      *need project based software adaption

    • Industrial design for highest requirements

      The battery packs have been chosen to meet extended requirements for capacity and high current capability in the full operating temperature range.

      Reducing the influence to the board net

      BRICK UPS offers a safe way to operate powerful measurement systems in a test drive in a controlled way. Modern power management in vehicles often disallows the tapping of power from the 12V or 24V board net. Especially in electronic powered vehicles the careful use of board net energy is getting more important. Exactly here BRICK UPS comes in play. The vehicle is now able to communicate to the UPS if it allows the tapping of energy from the board net.

      Comfortable hold-up time with up to 200 Watt

      In the time where no tapping is allowed the system supplies the connected vehicle measurement system from two Li-Ion batteries with up to 200 Watt with a system capacity up to 160 Wh. Thus, longer hold-up time for bigger systems are possible. The BRICK UPS200 can be clustered to increase power and capacity.

    • NamePart no.Description
      BRICK UPS SB200NI-1V0002300B17575-UPS-003-0000200Watt managed Li-ion UPS with 2xSmart-Battery Slots up to 80Wh per battery incl. 2x Smart Batteries NI3020

Information request

Infoanfrage

Inforequest

The use or processing of your data takes place within the framework of our data protection information, which you can view here.

* Mandatory item