EngineMonitorMini - b-plus.com

mobile automation

b-plus.com / Products / mobile automation / Engine /

Engine

Your contact

EngineMonitorMini

EngineMonitorMini

Display unit for industrial engines with J1939 interface

The EngineMonitorMini is a display and monitoring device for industrial engines with CAN-bus interface. Common messages to the SAE J1939 standard are supported.

The following information is displayed

  • Page 1: Engine speed, engine coolant temperature, engine oil pressure
  • Page 2: Engine coolant temperature, battery potential (voltage), engine instantaneous fuel economy, engine total hours of operation
  • Page 3: Engine percent load at current speed, actual engine percent torque, accelerator pedal position
  • Page 4: Error codes (DM1)

Technical details

  • Protocol: SAE J1939 - ISO 11898 - HighSpeed-CAN / 5V Basis / 250 kBaud
  • Dimensions (BxHxT): 87,5 x 87,5 x 37,7 mm
  • Display: TFT LCD colour display, 57,6 x 43,2 mm (active area), 2,8" diagonal
  • Protection class: IP67 (at the front in assembled state, otherwise IP65)
  • Operating temerature: -20...+70°C
  • Storage temperature: -30...+80°C
  • Operating voltage: 8...32 V DC
  • Power consumption: 70 mA (at 24 V DC)

Supported industrial engines

  • Caterpillar®
  • Cummins®
  • Daimler®
  • Deutz®
  • Perkins®
  • Scania®
  • Volvo Penta®
  • FPT®

Description

The CAN messages transmitted from the engine are evaluated in the EngineMonitorMini and displayed. The integrated fault diagnosis allows the discovery of possible errors of the engine (e.g. broken wire speed sensor). Thus, conventional analog or digital display instruments can be replaced or retrofitted.

Order information

Name Order-no. Description
EngineMonitorMini B12200-EMM-001-0451 Display unit for industrial engines with J1939 interface
Cable set on request Engine specific cable sets

Internal area

Please enter your email address and your password to log in to b-plus customer section:
Agreed? Log in now.

Info request EngineMonitorMini

  1. I agree with the general terms and conditions and also the data privacy statement.