Products  /  Automotive  /  Vehicle Data Harvesting  /  Data Recording Platforms  /  BRICK2

ADAS measurement platform BRICK2

Measurement platform for driver assistance and autonomous driving

ADAS measurement platform BRICK2 ADAS measurement platform BRICK2


The BRICK2 measurement platform was specially developed for the acquisition of raw data from sensors or ECUs during test drives.

In combination with the BRICK2 STORAGE NVMe Add-On, the BRICK2 achieves logging speeds of up to 32 Gbit/s and can store up to 60 TB.

The entire ADAS system solution can be installed in the vehicle without taking up any space or wiring thanks to the compact rack installation.

Your benefits with BRICK2:

  • Powerful platform for your next generation sensor technology for e.g. 6 cameras with 8 megapixel resolution
  • BRICK system building blocks for every aspect of your recording - all from one supplier
  • Completely synchronous recording of raw and bus data with the Time Aware platform, platform internal via hardware, external via Ethernet with XTSS
  • Future-proof investment through
    • extensive compatibility of the individual components in the BRICK system
    • Open platform concept for your software packages, AVETO components and third-party systems

Add-on SPC

Expansion for 2x x8-PCIe 3.0 Slot cards

Add-on SPC

 

  • PCIe Slot left: Mechanical x16, electrical x8 |
    8 Lanes PCIe 3.0 extension slot
     
  • PCIe Slot right:  Mechanical x8, electrical x8 |
    8 Lanes PCIe 3.0 extension slot
     
  • PCIe Card size: max. half size cards, 106.68 mm (height) X 175.26 mm (long), 1 slot mounting

 

Add-on BMC

Expansion for up to 2 measurement cards on one BRICK (BMC = BRICK Measurement Card)

Add-on BMC

  • BMC ETH 6000 - Time-synchronized measurement card with 6 1GbE 802.1AS ports and power over ethernet support

  • BMC VB2 - Flexible BRICK measurement Card with 8 CAN-FD or 4 CAN-FD and 2FR

    • Up to 2 cards on one BRICK offers up to 16 CAN FD or various configurations of CAN FD  / FlexRay interfaces
    • Modular concept with up to 4 bus modules (tiny)
       

Power Supply for BRICK

 

Time Synchronization

This product supports XTSS – Time Synchronization Service – more information here.

    • BRICK2 STORAGE

      Removeable storage unit
      Write speed of up to 24 Gbit/s and up to 32 TB capacity

      BRICK2 STORAGE NVMe

      Removeable storage unit
      Write speed of up to 32 Gbit/s and up to 60 TB capacity

       

    • High performance

      Hexa Core Intel® Core™ i7-9850HE Processor, 64 GB RAM, Intel® UHD Graphics 630

      Robust and compact system

      Designed for harsh environmental conditions

      Massive I/O Bandwidth

      6x 10 Gb Ethernet, 3x 1 Gb Ethernet, 4x USB3.1 Gen1

      Time Synchronization XTSS

      Platform Time sync: All Ethernet interfaces are hardware time synchronized,
      Cluster Time sync: Time synchronization via IEEE 1588 802.1AS-2020 multi domain

    • Processor and main memory

      • Intel® Core™ i7-9850HE Processor
      • 64 GB RAM DDR4-2666
      • 512 GB internal M.2 SSD

      Interfaces

      • 6x 10GBase-T Ethernet port for high bandwidth connectivity time synchronized
        (g)PTP IEEE 802.1AS-2020
      • 3x 1000Base-T Ethernet capture port, time synchronized
        (g)PTP IEEE 802.1AS-2020
      • 1x 1000Base-T RJ45 Ethernet management port
      • DisplayPort
      • 4x USB A 3.1 Gen1 / 4x USB A 2.0
      • M.2 industrial grade mass storage (boot device)
      • SYSCTRL (Ignition In, CAN-Bus for system control and board management controller)
      • GPIO 4x In, optional 4x Out (ca. 1A HighSide, @12 V power supply)
      • GPS for position and time, internal buffered for fast position fix and configuration backup
      • Microphone input and headphone output (analog)
      • USB connectivity for external gateway solutions
      • Independent system management controller for safe operation and system control

      Time synchronization

      • Hardware designed Platform and Cluster time synchronization
        (g)PTP IEEE 802.1AS-2020
      • Time-master GPS or external grand master clock, time relay to external devices
      • NMEA and PPS input / output

      Software support

      • Windows 10 IoT Enterprise
      • Linux Ubuntu 20.04

      High-End-FAS Frameworks

      • Application ready for the AVETO toolchain (AVETO® ready x64 platform)
      • And 3rd party frameworks

      Power supply

      • Supply voltage: 12 V (10 V – 32 V) wide range
      • Typical power consumption: 150 - 220 W (including STORAGE) depending on setup and performance level
      • Max. power consumption: 350 W, including measurement add-on and NVMe

      Operating Temperature Range

      Active cooled in the closed finned heat sink

      • Operating: -20 °C to +60 °C
      • Non-Operating: -40 °C to +85 °C

      Housing

      • Robust aluminum profile housing
      • 320 mm (W), 66 mm (1,5U) (H), 250 mm (D)
      • 22 mm or 44 mm Measurement Add-On

      Certification

      • CE / FCC / VCCI / ICES / KC
      • RoHS / REACH

    • Name

      Order-Nr.

      		Description
      BRICK2B17049-B2C-001-xxxxBRICK2 measurement and Recording platform for ADAS and AD development
      BRICK2 STORAGEB17049-B2S-xxx-xxxTBRICK2 STORAGE removable cartridge for high bandwidth recording up to 62 TB capacity
      BRICK2 SPCB17049-B2C-003-xxxxBRICK2 measurement and Recording platform, SPC Expansion for 2x x8-PCIe 3.0 Slot cards
      BRICK2 BMCB17049-B2C-002-xxxxBRICK2 measurement and Recording platform, BMC Expansion for 2x BMC modules
      BMC ETH 6000 Add-onB17575-BMC-ETH-6000BRICK Measurement Card BMC-ETH 6000
      BMC VB2 Add-onB17575-BMC-VB2-0008BRICK Measurement Card BMC-VB2 8x CAN FD
      BMC VB2 Add-onB17575-BMC-VB2-0002BRICK Measurement Card BMC-VB2 2x CAN FD

Information request

Infoanfrage

Inforequest

The use or processing of your data takes place within the framework of our data protection information, which you can view here.

* Mandatory item